---
title: Install EdgePowerMeter on Linux | Snap Store
description: Get the latest version of EdgePowerMeter for Linux - Measure power, energy
  and FPS/W efficiency of embedded and edge-AI devices
url: https://snapcraft.io/edgepowermeter
---

# EdgePowerMeter

[daniel (danielrossi1)](https://snapcraft.io/publisher/danielrossi1 "View all snaps from daniel (danielrossi1)")

* [daniel (danielrossi1)](https://snapcraft.io/publisher/danielrossi1 "View all snaps from daniel (danielrossi1)")
* [Devices and IoT](https://snapcraft.io/search?categories=devices-and-iot)
* [Science](https://snapcraft.io/search?categories=science)

latest/stable 2.0.0

Contact us about
[Snaps and IoT ›](https://snapcraft.io/about/contact-us)

Install latest/stable of EdgePowerMeter

---

**Install using the command line**

```
sudo snap install edgepowermeter
```

Don't have snapd? [Get set up for snaps](https://snapcraft.io/docs/installing-snapd).

---

### Package name

* edgepowermeter

---

### License

* Apache-2.0

---

### Last updated

* 8 October 2026 - latest/stable
* 8 October 2026 - latest/beta

---

### Websites

* [github.com/DanielRossi1/EdgePowerMeter](https://github.com/DanielRossi1/EdgePowerMeter "https://github.com/DanielRossi1/EdgePowerMeter")
* [danielrossi1.github.io](https://danielrossi1.github.io "https://danielrossi1.github.io")

---

### Source code

* [github.com/DanielRossi1/EdgePowerMeter](https://github.com/DanielRossi1/EdgePowerMeter "https://github.com/DanielRossi1/EdgePowerMeter")

---

### Report a bug

* [github.com/DanielRossi1/EdgePowerMeter/issues](https://github.com/DanielRossi1/EdgePowerMeter/issues "https://github.com/DanielRossi1/EdgePowerMeter/issues")

---

##### Report a Snap Store violation

* [Report this Snap](https://snapcraft.io/edgepowermeter#report-snap-modal)

---

* [Description](https://snapcraft.io/edgepowermeter#tab-description)
* [Security](https://snapcraft.io/edgepowermeter#tab-security)

#### Measure power, energy and FPS/W efficiency of embedded and edge-AI devices

EdgePowerMeter is the desktop app of an open-source USB power meter (ESP32-C3 + INA226) for embedded and edge-AI devices. It measures voltage, current and power at up to ~900 samples per second, records everything to CSV and turns it into energy and efficiency figures such as energy per inference and FPS per watt.

**Measure**

* Live voltage, current and power plots, smooth even after hours of recording
* Device timestamps (firmware 2.x): sample timing, energy and spectrum are not distorted by USB latency, and lost samples are detected
* Every acquisition is saved while it runs to a CSV file in your Documents folder, so nothing is lost if the PC stops

**Analyse**

* Statistics on any range: energy, charge, average and peak power, RMS current
* Markers (key M) split a run into segments, each with its own energy and power
* Benchmark: energy per inference, inferences per joule and FPS/W, also net of the idle power
* Power supply quality (ripple, noise, load regulation, settling time) and frequency spectrum
* CSV import/export and PDF reports with vector charts

**Configure**

* Sensor averaging and conversion-time presets from ~2 Hz to ~900 Hz, clock sync and calibration, all from the app (firmware 2.x; firmware 1.x is also supported)
* English, Italiano, Español, Français and Deutsch; dark, light or system theme

**After installing**, allow access to the meter's USB serial port once:

```
 sudo snap connect edgepowermeter:raw-usb
 sudo snap connect edgepowermeter:hardware-observe
```

Hardware, firmware and documentation: <https://github.com/DanielRossi1/EdgePowerMeter>

---

## Install EdgePowerMeter on your Linux distribution

Choose your Linux distribution to get detailed installation instructions. If yours is not shown, get more details on the [installing snapd documentation](https://snapcraft.io/docs/installing-snapd).

[### Arch Linux](https://snapcraft.io/install/edgepowermeter/arch)

[### CentOS](https://snapcraft.io/install/edgepowermeter/centos)

[### Debian](https://snapcraft.io/install/edgepowermeter/debian)

[### elementary OS](https://snapcraft.io/install/edgepowermeter/elementary)

[### Fedora](https://snapcraft.io/install/edgepowermeter/fedora)

[### KDE Neon](https://snapcraft.io/install/edgepowermeter/kde-neon)

[### Kubuntu](https://snapcraft.io/install/edgepowermeter/kubuntu)

[### Manjaro](https://snapcraft.io/install/edgepowermeter/manjaro)

[### Pop!\_OS](https://snapcraft.io/install/edgepowermeter/pop)

[### openSUSE](https://snapcraft.io/install/edgepowermeter/opensuse)

[### Red Hat Enterprise Linux](https://snapcraft.io/install/edgepowermeter/rhel)

[### Ubuntu](https://snapcraft.io/install/edgepowermeter/ubuntu)

[### Raspberry Pi](https://snapcraft.io/install/edgepowermeter/raspbian)