ISPCS brings the conference programme, speakers, community and account features to Ubuntu, together with a TimeStick V3 timing laboratory.
Connect a TimeStick V3 with firmware 74 to run PTP as grandmaster, follower or with automatic election. Configure app servos, view timing measurements, save and export runs, use simulation, and explore the bidirectional application clock bridge and audio pulses.
The app includes guarded firmware 74 installation and upgrade workflows that preserve the selected stick’s MAC address and serial number. PPS and UART controls are available for suitable connected hardware.
For TimeStick support, connect the hardware interfaces after installation:
sudo snap connect ispcs:alsa
sudo snap connect ispcs:raw-usb
sudo snap connect ispcs:hardware-observe
USB MIDI requires ALSA access. Firmware programming requires raw USB permission and normal device access. Host USB PTM requires a supported, enabled controller; otherwise the app uses its MIDI clock bridge. ISPCS does not change the Linux system clock.
You are about to open
Do you wish to proceed?
Thank you for your report. Information you provided will help us investigate further.
There was an error while sending your report. Please try again later.
Snaps are applications packaged with all their dependencies to run on all popular Linux distributions from a single build. They update automatically and roll back gracefully.
Snaps are discoverable and installable from the Snap Store, an app store with an audience of millions.
Snap can be installed from the command line on openSUSE Leap 15.x and Tumbleweed.
You need first add the snappy repository from the terminal. Choose the appropriate command depending on your installed openSUSE flavor.
Tumbleweed:
sudo zypper addrepo --refresh https://download.opensuse.org/repositories/system:/snappy/openSUSE_Tumbleweed snappy
Leap 15.x:
sudo zypper addrepo --refresh https://download.opensuse.org/repositories/system:/snappy/openSUSE_Leap_15.6 snappy
If needed, Swap out openSUSE_Leap_15. for, openSUSE_Leap_16.0 if you’re using a different version of openSUSE.
With the repository added, import its GPG key:
sudo zypper --gpg-auto-import-keys refresh
Finally, upgrade the package cache to include the new snappy repository:
sudo zypper dup --from snappy
Snap can now be installed with the following:
sudo zypper install snapd
You then need to either reboot, logout/login or source /etc/profile to have /snap/bin added to PATH.
Additionally, enable and start both the snapd and the snapd.apparmor services with the following commands:
sudo systemctl enable --now snapd
sudo systemctl enable --now snapd.apparmor
To install ISPCS, simply use the following command:
sudo snap install ispcs
Browse and find snaps from the convenience of your desktop using the snap store snap.
Interested to find out more about snaps? Want to publish your own application? Visit snapcraft.io now.