ISPCS brings the conference programme, speakers, community and account features to Ubuntu, together with a TimeStick V3 timing laboratory.
Connect a TimeStick V3 with firmware 74 to run PTP as grandmaster, follower or with automatic election. Configure app servos, view timing measurements, save and export runs, use simulation, and explore the bidirectional application clock bridge and audio pulses.
The app includes guarded firmware 74 installation and upgrade workflows that preserve the selected stick’s MAC address and serial number. PPS and UART controls are available for suitable connected hardware.
For TimeStick support, connect the hardware interfaces after installation:
sudo snap connect ispcs:alsa
sudo snap connect ispcs:raw-usb
sudo snap connect ispcs:hardware-observe
USB MIDI requires ALSA access. Firmware programming requires raw USB permission and normal device access. Host USB PTM requires a supported, enabled controller; otherwise the app uses its MIDI clock bridge. ISPCS does not change the Linux system clock.
You are about to open
Do you wish to proceed?
Thank you for your report. Information you provided will help us investigate further.
There was an error while sending your report. Please try again later.
Snaps are applications packaged with all their dependencies to run on all popular Linux distributions from a single build. They update automatically and roll back gracefully.
Snaps are discoverable and installable from the Snap Store, an app store with an audience of millions.
Snap is available for Red Hat Enterprise Linux (RHEL) 8 and RHEL 7, from the 7.6 release onward.
The packages for RHEL 7, RHEL 8, and RHEL 9 are in each distribution’s respective Extra Packages for Enterprise Linux (EPEL) repository. The instructions for adding this repository diverge slightly between RHEL 7, RHEL 8 and RHEL 9, which is why they’re listed separately below.
The EPEL repository can be added to RHEL 9 with the following command:
sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm
sudo dnf upgrade
The EPEL repository can be added to RHEL 8 with the following command:
sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
sudo dnf upgrade
The EPEL repository can be added to RHEL 7 with the following command:
sudo rpm -ivh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
Adding the optional and extras repositories is also recommended:
sudo subscription-manager repos --enable "rhel-*-optional-rpms" --enable "rhel-*-extras-rpms"
sudo yum update
Snap can now be installed as follows:
sudo yum install snapd
Once installed, the systemd unit that manages the main snap communication socket needs to be enabled:
sudo systemctl enable --now snapd.socket
To enable classic snap support, enter the following to create a symbolic link between /var/lib/snapd/snap and /snap:
sudo ln -s /var/lib/snapd/snap /snap
Either log out and back in again or restart your system to ensure snap’s paths are updated correctly.
To install ISPCS, simply use the following command:
sudo snap install ispcs
Browse and find snaps from the convenience of your desktop using the snap store snap.
Interested to find out more about snaps? Want to publish your own application? Visit snapcraft.io now.