Es un monitor serial que permite la conexión de puertos usb de arduino o pic con la computadora para poder enviar y recibir información entre las mismas. Permite exportar los datos obtenidos y enviados .
# Monitor Serial
Versión: 0.4
Monitor serial para microcontroladores Arduino y PIC, que permite conexión por USB para enviar y recibir datos desde la PC.
Permite también exportar los datos obtenidos.
## 📥 Instalación
### Desde archivo .snap
Si tienes el archivo local:
```bash
sudo snap install monitor-serial_0.3_amd64.snap --dangerous ```
### Desde Snap Store Si se publica oficialmente: ```bash
sudo snap install monitor-serial ```
## 🔌 Habilitar acceso al Arduino o PIC (solo una vez)
Para que el programa detecte los puertos USB (ej. /dev/ttyUSB0 o /dev/ttyACM0), es necesario conectar los permisos abre el terminal y escribe los siguientes comandos:
sudo snap connect monitor-serial:raw-usb
sudo snap connect monitor-serial:serial-port
Esto se hace una sola vez después de instalar.
Una vez conectado, el acceso queda habilitado incluso tras reiniciar o actualizar el snap.
## ▶ Uso
Ejecutar desde la terminal: ```bash
monitor-serial ```
O desde el menú de aplicaciones de tu entorno gráfico.
## 🛠 Requisitos
## 📌 Nota
Si al iniciar el programa no detecta puertos, revisa que hayas ejecutado los comandos de conexión y que tu usuario tenga permisos para acceder a dispositivos USB.
## 👤 Autor
Palacios Jose Año: 2025
You are about to open
Do you wish to proceed?
Thank you for your report. Information you provided will help us investigate further.
There was an error while sending your report. Please try again later.
Snaps are applications packaged with all their dependencies to run on all popular Linux distributions from a single build. They update automatically and roll back gracefully.
Snaps are discoverable and installable from the Snap Store, an app store with an audience of millions.
Snap is available for Red Hat Enterprise Linux (RHEL) 8 and RHEL 7, from the 7.6 release onward.
The packages for RHEL 7, RHEL 8, and RHEL 9 are in each distribution’s respective Extra Packages for Enterprise Linux (EPEL) repository. The instructions for adding this repository diverge slightly between RHEL 7, RHEL 8 and RHEL 9, which is why they’re listed separately below.
The EPEL repository can be added to RHEL 9 with the following command:
sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm
sudo dnf upgrade
The EPEL repository can be added to RHEL 8 with the following command:
sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
sudo dnf upgrade
The EPEL repository can be added to RHEL 7 with the following command:
sudo rpm -ivh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
Adding the optional and extras repositories is also recommended:
sudo subscription-manager repos --enable "rhel-*-optional-rpms" --enable "rhel-*-extras-rpms"
sudo yum update
Snap can now be installed as follows:
sudo yum install snapd
Once installed, the systemd unit that manages the main snap communication socket needs to be enabled:
sudo systemctl enable --now snapd.socket
To enable classic snap support, enter the following to create a symbolic link between /var/lib/snapd/snap and /snap:
sudo ln -s /var/lib/snapd/snap /snap
Either log out and back in again or restart your system to ensure snap’s paths are updated correctly.
To install monitor-serial, simply use the following command:
sudo snap install monitor-serial
Browse and find snaps from the convenience of your desktop using the snap store snap.
Interested to find out more about snaps? Want to publish your own application? Visit snapcraft.io now.