ser2netweb shares local serial ports over the network (raw TCP, telnet, RFC 2217, UDP), is a Modbus RTU/TCP gateway and publishes to MQTT and Sparkplug B, all set up in a web UI. It is an independent project (named ser2net up to 2.9.x), not related to the classic ser2net daemon, whose configuration files it can import.
USB serial adapters (/dev/ttyUSB*, /dev/ttyACM*, also by /dev/serial/by-id) need the raw-usb interface: sudo snap connect ser2netweb:raw-usb The service is off after installing: sudo snap start --enable ser2netweb.daemon Its web UI then listens on 127.0.0.1:8080; for the network: sudo snap set ser2netweb bind-ip=0.0.0.0 port=8080 Its data is in /var/snap/ser2netweb/common/data. The first admin password: sudo ser2netweb --data-dir /var/snap/ser2netweb/common/data --set-password admin
You are about to open
Do you wish to proceed?
Thank you for your report. Information you provided will help us investigate further.
There was an error while sending your report. Please try again later.
Snaps are applications packaged with all their dependencies to run on all popular Linux distributions from a single build. They update automatically and roll back gracefully.
Snaps are discoverable and installable from the Snap Store, an app store with an audience of millions.
On a Raspberry Pi running the latest version of Raspbian snap can be installed directly from the command line:
sudo apt update
sudo apt install snapd
You will also need to reboot your device:
sudo reboot
After this, install the snapd snap in order to get the latest snapd:
sudo snap install snapd
To install ser2netweb, simply use the following command:
sudo snap install ser2netweb
Browse and find snaps from the convenience of your desktop using the snap store snap.
Interested to find out more about snaps? Want to publish your own application? Visit snapcraft.io now.