Open source home automation that puts local control and privacy first
Home Assistant is a free and open-source software for home automation that is designed to be the central control system for smart home devices with focus on local control and privacy.
It can be accessed via a web-based user interface, via companion apps for Android and iOS, or using voice commands via a supported virtual assistant like Google Assistant or Amazon Alexa.
Home Assistant integrates with over a thousand different devices and services.
NOTE! This is Home Assistant Core (not supervised).
Your new installation will be available through your browser at http://localhost:8123/ (or change localhost to any other IP address where the snap packages is installed). You will get a launcher available in your application menu on desktops.
Important information about updates
Since each major versions of Home Assistant might bring breaking changes, you will only auto-update for minor releases. Each major release must be upgraded manually, by switching channel.
See available channels in the software center or with
snap info home-assistant-snap
Please use the stable versions, e.g 2021.8/stable.
There is a binary sensor binary_sensor.updater that will flip to true from false whenever there are updates available in a newer channel. Use this to show a notification whenever a new major release is available.
Can't connect to your USB (e.g Zigbee, Z-wave, removable drive)?
See snap connections home-assistant-snap for necessary plugs (such as access to USB, removable media etc) and connect them with
$ snap connect home-assistant-snap:<plug>
where <plug> can be in example raw-usb.
network: allows Home Assistant access to the network.
network-bind: allows operating as a network service, to run the Home Assistant server.
network-control: enables the configuration of networking and network namespaces via ip netns, providing a wide, privileged access to networking. This is required for the DHCP discovery integration to work which will watch the network for DHCP requests for supported devices and services. To disable this feature you will have to disable the default_config from you configuration.yaml and disconnect the network-control plug with snap disconnect home-assistant-snap:network-control.
raw-usb: allows access to all connected USB devices via a raw interface.
removable-media: allows read/write access to mounted removable storage in /media, /run/media and /mnt.
serial-port: enables access to a specific serial port. This interface is restricted because it provides privileged access to configure serial port hardware. Might require hot-plug support snap set system experimental.hotplug=true followed by systemctl restart snapd.
components: Load custom components to Home Assistant. You will find the Home Assistant Community Store package here: https://snapcraft.io/home-assistant-hacs - Installations on own risk and note that provided integrations are not tested or guaranteed to work.
The packages for RHEL 8 and RHEL 7 are in each distribution’s respective Extra Packages for Enterprise Linux (EPEL) repository. The instructions for adding this repository diverge slightly between RHEL 8 and RHEL 7, which is why they’re listed separately below.
The EPEL repository can be added to RHEL 8 with the following command: