This daemon allows telnet and tcp sessions to be established with a host's serial ports. Combined with a terminal emulator, this can be a very simple means to configure network devices or other equipment with a serial port. This is remarkably similar to the reverse telnet feature of some Cisco routers.
You will need to connect the raw-usb interface using: $ sudo snap connect ser2net-plars:raw-usb
*note: If you are on classic and don't have a gadget with support for the serial-port interface, you should install with --classic
Example usage: $ ser2net-plars.config-get > ser2net.yaml <edit the config> $ cat /tmp/ser2net.yaml |sudo /snap/bin/ser2net-plars.config-set $ sudo snap restart ser2net-plars.ser2net
Snaps are applications packaged with all their dependencies to run on all popular Linux distributions from a single build. They update automatically and roll back gracefully.
Snaps are discoverable and installable from the Snap Store, an app store with an audience of millions.
On a Raspberry Pi running the latest version of Raspbian snap can be installed directly from the command line:
sudo apt update
sudo apt install snapd
You will also need to reboot your device:
sudo reboot
After this, install the snapd snap in order to get the latest snapd:
sudo snap install snapd
To install ser2net-plars, simply use the following command:
sudo snap install ser2net-plars
Browse and find snaps from the convenience of your desktop using the snap store snap.
Interested to find out more about snaps? Want to publish your own application? Visit snapcraft.io now.
