Install latest/stable of ser2net-plars
Ubuntu 16.04 or later?
Make sure snap support is enabled in your Desktop store.
Install using the command line
sudo snap install ser2net-plarsDon't have snapd? Get set up for snaps.
This daemon allows telnet and tcp sessions to be established with a host's serial ports. Combined with a terminal emulator, this can be a very simple means to configure network devices or other equipment with a serial port. This is remarkably similar to the reverse telnet feature of some Cisco routers.
You will need to connect the raw-usb interface using: $ sudo snap connect ser2net-plars:raw-usb
*note: If you are on classic and don't have a gadget with support for the serial-port interface, you should install with --classic
Example usage: $ ser2net-plars.config-get > ser2net.yaml <edit the config> $ cat /tmp/ser2net.yaml |sudo /snap/bin/ser2net-plars.config-set $ sudo snap restart ser2net-plars.ser2net
Generate an embeddable card to be shared on external websites.
Choose your Linux distribution to get detailed installation instructions. If yours is not shown, get more details on the installing snapd documentation.
