This daemon allows telnet and tcp sessions to be established with a host's serial ports. Combined with a terminal emulator, this can be a very simple means to configure network devices or other equipment with a serial port. This is remarkably similar to the reverse telnet feature of some Cisco routers.
You will need to connect the raw-usb interface using: $ sudo snap connect ser2net-plars:raw-usb
*note: If you are on classic and don't have a gadget with support for the serial-port interface, you should install with --classic
Example usage: $ ser2net-plars.config-get > ser2net.yaml <edit the config> $ cat /tmp/ser2net.yaml |sudo /snap/bin/ser2net-plars.config-set $ sudo snap restart ser2net-plars.ser2net
Snaps are applications packaged with all their dependencies to run on all popular Linux distributions from a single build. They update automatically and roll back gracefully.
Snaps are discoverable and installable from the Snap Store, an app store with an audience of millions.
Snapd can be installed from Manjaro’s Add/Remove Software application (Pamac), found in the launch menu. From the application, search for snapd, select the result, and click Apply.
Alternatively, snapd can be installed from the command line:
sudo pacman -S snapd
Once installed, the systemd unit that manages the main snap communication socket needs to be enabled:
sudo systemctl enable --now snapd.socket
To enable classic snap support, enter the following to create a symbolic link between /var/lib/snapd/snap and /snap:
sudo ln -s /var/lib/snapd/snap /snap
Either log out and back in again, or restart your system, to ensure snap’s paths are updated correctly.
To install ser2net-plars, simply use the following command:
sudo snap install ser2net-plars
Browse and find snaps from the convenience of your desktop using the snap store snap.
Interested to find out more about snaps? Want to publish your own application? Visit snapcraft.io now.
